Steam Room Installation in Fort Lauderdale, FL
Properly sized generators, real waterproofing, sloped ceilings, and frameless glass, so your Fort Lauderdale steam room performs and never leaks.
Steam Rooms Built Vapor-Tight for South Florida
A steam room is a waterproofing project with a generator attached. That is the part most homeowners discover too late, usually when a downstairs ceiling in a Galleria-corridor condo starts staining. Every steam room we build in Fort Lauderdale gets a full vapor-tight envelope, a sloped ceiling that drives condensate to the walls, and a sealed door system.
Generator sizing is the second half of the job. Cubic footage, ceiling height, and surface material all drive it. A stone-lined steam shower in a Rio Vista primary bath needs meaningfully more output than the same volume in acrylic, and an undersized unit will never hold 110 to 120°F no matter how long you run it.
We install for both sides of Fort Lauderdale: single-family baths in Coral Ridge and Victoria Park where we can place the generator in a nearby closet or attic, and beachfront condos where the generator location, drain access, and noise all have to satisfy building management before a tile comes off.
From a compact steam shower conversion in Colee Hammock to a full stone steam room in a Harbor Beach estate, we build them vapor-tight, correctly sized, and easy to live with.
Frequently Asked Questions
How much does a steam room cost in Fort Lauderdale?
Converting an existing shower typically runs $8,000 to $19,000. A purpose-built stone steam room with frameless glass and seating generally runs $18,000 to $45,000+ depending on materials.
Can any shower become a steam room?
Only if it can be fully sealed. The enclosure needs a vapor-tight membrane, a sloped ceiling, a sealed glass door with a transom, and no open gaps at the top, which most standard showers lack.
Where does the generator go?
Within about 25 feet of the room, in a vented closet, cabinet, or attic space with drain access. In condos we confirm the location and noise with building management before starting.
How is a steam room different from a sauna?
Steam runs about 110 to 120°F at nearly 100 percent humidity, a sauna runs 160 to 195°F dry. Steam is gentler on the airways, a sauna produces a deeper, faster sweat.
Will steam damage my condo unit or the one below?
Not when it is built correctly. Full membrane waterproofing, a properly pitched ceiling, sealed penetrations, and dedicated exhaust are exactly what keep moisture inside the enclosure.
How long does installation take?
A shower conversion usually takes five to nine days including tile and glass. A full custom steam room runs two to four weeks, with stone and frameless glass lead times driving the schedule.
Request a free sauna consultation or email contact@saunashop.us.